
//start "sketch"
#include <TVout.h>
#include "Wire.h"
//#include <pollserial.h>
#include <fontALL.h>
TVout TV;
//pollserial pserial;
#define DS1307_I2C_ADDRESS 0x68 // This is the I2C address
// Global Variables
long previousMillis = 0; // will store last time time was updated
byte second, minute, hour, dayOfWeek, dayOfMonth, month, year;
long interval = 200;
int tvx,tvy,tvradius,x2,y2,x3,y3;
// Convert normal decimal numbers to binary coded decimal
byte decToBcd(byte val)
{
return ( (val/10*16) + (val%10) );
}
// Convert binary coded decimal to normal decimal numbers
byte bcdToDec(byte val)
{
return ( (val/16*10) + (val%16) );
}
// Gets the date and time from the ds1307 and prints result
void getDateDs1307()
{
// Reset the register pointer
Wire.beginTransmission(DS1307_I2C_ADDRESS);
Wire.send(0x00);
Wire.endTransmission();
Wire.requestFrom(DS1307_I2C_ADDRESS, 7);
// A few of these need masks because certain bits are control bits
second = bcdToDec(Wire.receive() & 0x7f);
minute = bcdToDec(Wire.receive());
hour = bcdToDec(Wire.receive() & 0x3f); // Need to change this if 12 hour am/pm
dayOfWeek = bcdToDec(Wire.receive());
dayOfMonth = bcdToDec(Wire.receive());
month = bcdToDec(Wire.receive());
year = bcdToDec(Wire.receive());
}
void printTime()
{
TV.set_cursor(0,0);
TV.print( char( hour/10 + 0x30) );
TV.print( char( hour%10 + 0x30) );
TV.print(":");
TV.print( char(minute/10 + 0x30));
TV.print( char(minute%10 + 0x30));
TV.print(":");
TV.print(char (second/10+0x30));
TV.print(char (second%10+0x30));
TV.set_cursor(8,9);
TV.print(char(dayOfMonth/10+0x30));
TV.print(char(dayOfMonth%10+0x30));
TV.print("/");
TV.print(char(month/10+0x30));
TV.print(char(month%10+0x30));
TV.set_cursor(10,18);
TV.print("20");
TV.print(char(year/10+0x30));
TV.print(char(year%10+0x30));
TV.draw_circle(tvx,tvy,tvradius-5,BLACK,BLACK);
float angle = second*6 ;
angle=(angle/57.29577951) ; //Convert degrees to radians
x3=(tvx+(sin(angle)*(tvradius-6)));
y3=(tvy-(cos(angle)*(tvradius-6)));
TV.draw_line(tvx,tvy,x3,y3,WHITE);
angle = minute * 6 ;
angle=(angle/57.29577951) ; //Convert degrees to radians
x3=(tvx+(sin(angle)*(tvradius-11)));
y3=(tvy-(cos(angle)*(tvradius-11)));
TV.draw_line(tvx,tvy,x3,y3,WHITE);
angle = hour * 30 + int((minute / 12) * 6 ) ;
angle=(angle/57.29577951) ; //Convert degrees to radians
x3=(tvx+(sin(angle)*(tvradius-15)));
y3=(tvy-(cos(angle)*(tvradius-15)));
TV.draw_line(tvx,tvy,x3,y3,WHITE);
}
void setup() {
Wire.begin();
getDateDs1307() ;
//TV.begin(_NTSC,184,72);
//the circle didn't look very round with 184,72
TV.begin(_NTSC,150,71);
TV.select_font(font6x8);
TV.clear_screen();
//TV.println("TV Clock");
tvx= TV.hres()/2;
tvy=TV.vres()/2;
tvradius=TV.vres()/2 ;
//clock face
TV.draw_circle(tvx,tvy,tvradius,WHITE);
//hour ticks
for( int z=0; z < 360;z= z + 30 ){
//Begin at 0° and stop at 360°
float angle = z ;
angle=(angle/57.29577951) ; //Convert degrees to radians
x2=(tvx+(sin(angle)*tvradius));
y2=(tvy-(cos(angle)*tvradius));
x3=(tvx+(sin(angle)*(tvradius-5)));
y3=(tvy-(cos(angle)*(tvradius-5)));
TV.draw_line(x2,y2,x3,y3,WHITE);
}
//TV.set_hbi_hook(pserial.begin(57600));
}
void loop() {
// if (pserial.available()) {
// TV.print((char)pserial.read());
// }
// other processing here maybe
unsigned long currentMillis = millis();
if(currentMillis - previousMillis > interval) {
// save the last time you printed and updated
previousMillis = currentMillis;
TV.delay(1);
printTime();
//read RTC
getDateDs1307() ;
}
}
//end sketch
Once again just a clock, blocky but readable :
| 74HC595 | LCD | Arduino | power |
| 1 | 4 | ||
| 2 | 5 | ||
| 3 | 6 | ||
| 4 | 14 | ||
| 5 | 13 | ||
| 6 | 12 | ||
| 7 | 11 | ||
| 8 | gnd | ||
| 9 | |||
| 10 | +ve | ||
| 11 | 4 (clk) | ||
| 12 | 2 (strobe) | ||
| 13 | gnd | ||
| 14 | 8 (data) | ||
| 15 | |||
| 16 | +ve | ||
| 1 | gnd | ||
| 2 | +ve | ||
| 3 | 2.2K to gnd |
//the "sketch"
// Example use of LCD3Wire and Wire library
// to read time from RTC and display on LCD
#include <LCD3Wire.h>
#include "Wire.h"
// Arduino pins
#define LCD_LINES 2 // number of lines in your display
#define DOUT_PIN 8 // Dout pin
#define CLK_PIN 4 // Clock pin
#define STR_PIN 2 // Strobe pin
#define DS1307_I2C_ADDRESS 0x68
long previousMillis = 0; // will store last time time was updated
byte second, minute, hour, dayOfWeek, dayOfMonth, month, year;
long interval = 200;
//create object to control an LCD.
LCD3Wire lcd = LCD3Wire(LCD_LINES, DOUT_PIN, STR_PIN, CLK_PIN);
// Convert normal decimal numbers to binary coded decimal
byte decToBcd(byte val)
{
return ( (val/10*16) + (val%10) );
}
// Convert binary coded decimal to normal decimal numbers
byte bcdToDec(byte val)
{
return ( (val/16*10) + (val%16) );
}
// Gets the date and time from the ds1307 and prints result
void getDateDs1307()
{
// Reset the register pointer
Wire.beginTransmission(DS1307_I2C_ADDRESS);
Wire.send(0x00);
Wire.endTransmission();
Wire.requestFrom(DS1307_I2C_ADDRESS, 7);
// A few of these need masks because certain bits are control bits
second = bcdToDec(Wire.receive() & 0x7f);
minute = bcdToDec(Wire.receive());
hour = bcdToDec(Wire.receive() & 0x3f); // Need to change this if 12 hour am/pm
dayOfWeek = bcdToDec(Wire.receive());
dayOfMonth = bcdToDec(Wire.receive());
month = bcdToDec(Wire.receive());
year = bcdToDec(Wire.receive());
}
void printTime()
{
lcd.cursorTo(1, 4); //line=1, x=4.
lcd.print( char( hour/10 + 0x30) );
lcd.print( char( hour%10 + 0x30) );
lcd.print(':');
lcd.print( char(minute/10 + 0x30));
lcd.print( char(minute%10 + 0x30));
lcd.print(':');
lcd.print(char (second/10+0x30));
lcd.print(char (second%10+0x30));
lcd.cursorTo(2, 3); //line=2, x=3.
lcd.print(char(dayOfMonth/10+0x30));
lcd.print(char(dayOfMonth%10+0x30));
lcd.print('/');
lcd.print(char(month/10+0x30));
lcd.print(char(month%10+0x30));
lcd.printIn("/20");
lcd.print(char(year/10+0x30));
lcd.print(char(year%10+0x30));
}
void setup() {
Wire.begin();
getDateDs1307() ;
lcd.init();
lcd.clear();
}
void loop() {
unsigned long currentMillis = millis();
if(currentMillis - previousMillis > interval) {
// save the last time you printed and updated
previousMillis = currentMillis;
printTime();
//read RTC
getDateDs1307() ;
}
}
//end sketch
The result as expected (just a clock :-) ):
#!/usr/bin/env python
import sys
import tweepy
import android
droid=android.Android()
CONSUMER_KEY = 'paste your Consumer Key here'
CONSUMER_SECRET = 'paste your Consumer Secret here'
ACCESS_KEY = 'paste your Access Key here'
ACCESS_SECRET = 'paste your Access Secret here'
auth = tweepy.OAuthHandler(CONSUMER_KEY, CONSUMER_SECRET)
auth.set_access_token(ACCESS_KEY, ACCESS_SECRET)
api = tweepy.API(auth)
for tweet in friend_tweets:
droid.notify(tweet.author.name,tweet.text)
To send a tweet ( something like this) :#!/usr/bin/env python
import sys
import tweepy
import android
droid=android.Android()
CONSUMER_KEY = 'paste your Consumer Key here'
CONSUMER_SECRET = 'paste your Consumer Secret here'
ACCESS_KEY = 'paste your Access Key here'
ACCESS_SECRET = 'paste your Access Secret here'
auth = tweepy.OAuthHandler(CONSUMER_KEY, CONSUMER_SECRET)
auth.set_access_token(ACCESS_KEY, ACCESS_SECRET)
api = tweepy.API(auth)
tweet = droid.dialogGetInput('Twitter', 'Type your tweet here :').result
api.update_status(tweet)